Are you having some toilet issues? If you are, you may not know exactly what to do next. There are different solutions for most issues, but you can fix one issue and have an entirely different issue come up a few days later. Here are some tips from Plumber Midlothian TX to help you determine what needs to be done.
When troubleshooting toilet issues, knowing what’s causing the issue is usually the first step to fixing your toilet. Turn off the water supply to your toilet (the most likely cause behind the clog). If you think the toilet is already clogged, do not flush it down.
Most people are familiar with common toilet repair problems like the inability to flush and/or turn on the bathroom sink. While this is an issue that plumbers can fix, homeowners may not be aware of the plumbing issues that cause these problems. For example, a slow flushing toilet causes the flow of water more slowly, so when you turn on the sink to flush, you also run the risk of hitting the backside of the trap, which runs along the rim of the toilet. This can lead to more frequent bathroom repairs.
Most common toilet issues are due to leaks. Leaks are caused by the area around the trap getting wet or warm from the fixtures and pipes around the toilet’s base. When you see water leaking from around the toilet fixtures, it is wise to have a plumber look at it right away. Most leaks are easy to fix and don’t require a plumber to come out right away.
Toilet issues that occur after a storm are usually harder to fix and require regular maintenance. Heavy rain or even snow can cause gutters to overheat and collapse, which then creates issues with the downspout. Other times, the pipes under the toilet can freeze and cause a clog, which requires a plumber to come out and address the problem. To prevent any problems from happening in the future, make sure you follow these toilet maintenance tips for routine maintenance and emergency repair.
One thing that most people do when they notice a leak is to spray the toilet bowl. While this might seem like a good idea, spraying the bowl can actually cause more leaks and damage to fixtures. The problem with spraying is that when you spray too much, you may end up causing more condensation in your drains and toilets. More condensation means more leaks. It’s better to use a plunger or a contact rod to clean out the toilet bowl before you spray.
Another one of the most common issues is a clogged toilet, which requires DIY toilet repair. If your toilet doesn’t flush right when you press the flapper, it’s likely that your blog is in the tank, which will require you to turn the water off and run some water through the pipes until the clog is removed. This might seem like a big job, especially if the plumber is not your neighbor, or you have never done this before, but the effort will be worth it in the long run. A clogged toilet requires special attention because if left undetected, it could lead to other serious issues.
Some people make the mistake of trying to resolve an issue by pushing it to the back of their minds. When a leak happens, you must take immediate action and get a plumber out to inspect the leaky pipes and solve the issue. If left unchecked, a clogged toilet bowl can lead to the same problems in your home, which means a higher water bill and possibly an infestation of bugs in your home. Be patient, and don’t push an issue to the back of your mind. If you don’t feel comfortable doing it, try calling a local plumber. It’s better to make a mistake on the side of caution than to make a costly mistake and pay for it later.